How do I decontaminate the Vapor Pin® Sampling Device between installations?

Please follow the following steps to decontaminate the Vapor Pin® Sampling Device between installations.   1. Discard the Vapor Pin® Sleeve and Vapor Pin® Cap 2. Pre-heat an oven to a temperature of 265° F (130°C) 3. Decontaminate the Vapor Pin® Sampling Device in a Alconox® solution for 8 minutes if brass or 30 minutes if stainless steel - An Alconox® solution is a concentrated, anionic detergent that can be used for manual or ultrasonic cleaning 4. After bath dry off your Vapor Pin® Sampling Device and put the Vapor Pin® in the pre-heated over for 8 minutes if brass or 30 minutes if stainless steel   Please be sure to follow all possible health and safety guidelines when working with chemicals and handling product.

Did this answer your question?