US Patent # 8,220,347 B2, US 9,291,531 B2 | Call Us Today! 1-614-504-6915

Announcements


October 15-18, 2018: 34th Annual International Conference on Soils, Sediment in Amherst, Massachusetts at Booth B16. October 18, 2018 - Session 19: 9:30 a.m - Craig A. Cox will present Successful Closure of a DNAPL Site – Lessons Learned ... See MoreSee Less

#stopradon AARST international Radon and Trade Show 2018 ... See MoreSee Less

Available now - Mini Vapor Pin. Please make sure to read the SOP or the Mini Vapor Pin as it is a different installation that the original version. The Mini Vapor Pin comes as a set. SET INCLUDES: Mini Vapor Pin®, FLX-VPTM Barb with O-ring, Silicone Sleeve, and Mini Vapor Pin® Secure Cover with O-ring.
Order yours today!
https://www.vaporpin.com/product/mini-vapor-pin/

https://www.vaporpin.com/wp-content/uploads/2018/07/Mini-Pin-SOP-7-13-2018-Web.pdf
... See MoreSee Less

Did you know that the Vapor Pin is a tool for..
1 - Locating VOC sources below hard surfaces
2 - Collecting high-resolution data sets
3 - Differential Pressure Testing
4 - Radon Mitigation Testing
5 - Stray Gas Evaluations
6 - Sub-Slab Soil Gas Sampling
7 - Long Term Monitoring
8 - Continuous Monitoring
9 - Vapor Intrusion Assessments
10 - Methane Sampling on Landfills
etc, etc., etc.,
Contact us for more information
... See MoreSee Less

METHODS AND TECHNIQUES IN THE INVESTIGATION AND REMEDIATION OF CONTAMINATED AREAS. 3rd workshop successful. Thank you to all those who attended. #sitecharacterization #vaporpin #vaporpindobrasil ... See MoreSee Less

All set up and ready for the GOwen Environmental - Contaminated Site Management Outdoor Demonstration. ... See MoreSee Less

Happy Memorial Day Weekend! Thank you to those who served and who are serving. ... See MoreSee Less

Radon in Schools: Despite state and federal recommendations, only 53 of 331 school districts in Minnesota report they have tested classrooms for radon since 2012. KARE 11 found out which Twin Cities area districts are testing – and which ones are not.

Hollywood recognizes Radon: Shantel VanSanten has turned a personal tragedy into a catalyst for helping others. After her grandmother passed, VanSanten and her family looked for answers, and were shocked at what they found. “We searched to understand what the cause was, and we found it was from radon poisoning, which was found in [her] basement.”
... See MoreSee Less

Are you attending @TCEQEVENTS? Stop by and see whats new at Booth 525 ... See MoreSee Less

Stop by to see us next week at TCEQ -Booth 525 or Show of the South Booth #319 ... See MoreSee Less

Thank you to everyone who took the time to attend our Battelle learning lab at the Battelle Chlorinated conference today. We appreciate your time and wonderful questions. #battelle2018 ... See MoreSee Less

Our Featured Products


VPIN0522SS
VP to Tygon to Nylaflow

Stainless Steel VAPOR PIN® VPIN0522SS

5.00 out of 5 based on 1 customer rating
(1 customer review)

$50.00

The barb at the top of the Vapor Pin® connects to ¼-inch sample tubing (typically Nylon or Teflon®) with softer tubing, preferably Tygon®. Because stainless steel is more durable than brass and more corrosion resistant, we recommend stainless steel for long-term installations and in corrosive environments. Brass Vapor Pins® are less durable than stainless steel, but they can be reused repeatedly with proper care. We recommend brass Vapor Pins® for short-term installations, especially those installed in the stick-up configuration.

This item requires the Installation/Extraction Tool.

Quantity discounts
1-24 $50.00
25-49 $45.00
50+ $40.00

SKU: VPIN0522SS

Category:

Tag:

Product Description

The barb at the top of the Vapor Pin® connects to ¼-inch sample tubing (typically Nylon or Teflon®) with softer tubing, preferably Tygon®. Because stainless steel is more durable than brass and more corrosion resistant, we recommend stainless steel for long-term installations and in corrosive environments. Brass Vapor Pins® are less durable than stainless steel, but they can be reused repeatedly with proper care. We recommend brass Vapor Pins® for short-term installations, especially those installed in the stick-up configuration.

Total length 3 1/2″. Top barbed fitting is quarter inch in diameter.

This item requires the Installation/Extraction Tool.

Additional Information

Weight .8 lbs
Dimensions 3.5 x .5 x 0.8125 in

1 review for Stainless Steel VAPOR PIN® VPIN0522SS

  1. 5 out of 5

    :

    I have had the opportunity to use these vapor pins on several vapor intrusion projects recently and cannot say enough good things about this technology!! One such project included numerous residential and commercial properties that are part of the Brownfield Cleanup Program. Of the literally hundreds of pins we installed, we only needed to provide additional help getting a tight seal (i.e. plumber’s wax) on TWO of them (and these were in residential crawl spaces with barely a 2” slab). The time (and subsequent money) my company has saved, make taking the jump into purchasing your own comprehensive kit SO worth it!! The customer service is also stellar (i.e. i called last week in need of 30 extra pins by the end of business the next day and they pulled it off without a hitch). FANTASTIC product, company and people. I recommend them to everyone and will only use them on my projects from now on.

    Shannon P.
    Environmental Resources Management

Add a review